Check out our step by step guide on how to change a tyre - including everything you'll need to do it. It's easier than you think!
By Chloe Martell
Updated on Dec 4th, 2020
Checking your oil and keeping your screen wash topped up are just some of the checks you should be carrying out on your car on a regular basis, but keeping an eye on your tyre pressure is just as important! Worn, under inflated AND over inflated tyres can seriously affect the steering, braking and handling of your car (especially in wet and slippery conditions!). If you read our last blog on how to check your tyre pressure, you’ll know it’s actually pretty easy to maintain your tyres even when one of them blows out! So let’s go through some easy step by step instructions on how to sort a flat tyre! Before we begin – you’re going to make sure your car is equipped with a few things first. Most cars already have these features as standard but if you’re not sure – it’s best to go check and then stock up on some of the below items if needed.
First of all make sure you get your vehicle and it’s passengers to a safe place before you attempt to change the tyre. DO NOT use the hard shoulder of motorway even if that means driving with a flat tyre to find a lay by or other safe place. Make sure the car is positioned on flat even ground. Then all you need to do is...
It’s worth keeping your old tyre and taking it to your nearest garage to get repaired as soon as possible if the damage isn’t too severe. They can then fix it up and swap it round again for your spare! Spare tyres aren’t designed to last very long, so if it’s a complete blowout you’ll need to get yourself a new tyre regardless. It’s never a pleasant situation having to change a tyre, especially if you are on your own and it’s the middle of the night! So if you have a spare half an hour one day its worth practising at least once so you’re prepared if it were to ever happen in real life!
First and foremost and obviously this is the first thing you should make sure you have in your car at all times
Most people keep this in their glovebox, it’s always worth keeping it in a safe place
Something to prop your car up so you can change the wheel
This will be used to remove the wheel nuts and pry of the wheel cover
If you get a flat tyre at night, you’re going to need to see what you’re doing
Hazard lights are probably enough but this is just as an extra precaution
this is something to lodge against your other wheels to prevent the car from rolling backwards whilst you carry out the job – however we strongly advise never changing your tyre on a slope or hill as this makes it much more difficult.
To cut cable ties if your wheel trims are secured that way.
Prop your handbrake up and turn your hazard lights on
You’re not going to want the car to be weighted down when you need to jack it up in a minute!
The spare tyre should be in your boot – make sure this is inflated and refer to your handbook for the correct lifting point with the jack
Not all cars have them, but if yours does you’ll need something to cut the cable ties
Unscrew the nuts on the defected tyre using your wheel wrench or locking wheel-nut adapter
Once you have found the jacking point for your car, use the jack to elevate it. off the ground about 6 inches – just enough so you can get the wheel off
Be careful as wheels aren’t as light as they may look! Take the old wheel off and place it to one side
Make sure the wheel is the right way round, then secure it in place with the top wheel-nuts, then tighten them slightly and the remaining ones with your hand
Lower the car using the jack until the wheel touches the road, then tighten the nuts fully using your wheel wrench and then put your wheel trim back on
Put the old tyre in your boot, pack your tools and get back on the road
Get on the road today with instant comprehensive cover and start earning your own No Claims Discount
Join thousands of young drivers enjoying comprehensive cover with no curfews or night-time driving restrictions